OEM Manufacturer Bunnings Electrical Cable - cold shrinkage cable accessories – Histe
OEM Manufacturer Bunnings Electrical Cable - cold shrinkage cable accessories – Histe Detail:
cold shrinkage cable accessories
1.Reliable capability
It is made from imported-SiR (Silicone Rubber) with satisfying electric insulation, outstanding elasticity tracking resistance, corrosion resistance etc, as well as approved electric capability and long-term service-life. It can exert modest radial pressure upon the cable all the time to make the contact compact after installing .
Also it will expand or shrink simultaneously with the cable to avoid tip-and-run breakthrough caused by the working cable’s respiration. The stresscone and primary insulation are composite as one to ensure insulation reliable and performing safe by solving the problem of the stress concentration on the contour of the semiconductive layer.
2.Simple and convenient installation
By use of the special cold shrinkage technique invented by Histe Co., Ltd, one with no special training can fix it without the assistant of fire, electricity. The process is simple and labor-saving.
It is adequate for aloftwork, fieldwork and works in the combustible environment in particular, such as , coal mine, oilfield and under-well. Thus greatly reduces the quality accidents caused by improper operation.
3.Excellent chemical capability
Feculence-resistance, alkali resistance, ageing resistance , perfect hydrophobic performance, superior heat and cold resistance are included. The proper working temperature ranges from -70℃ to +120℃. Therefore this product can be specially used in high-altitude, cold, humid, saline and foggy regions as well as heavy polluted areas.
This product is easy-installation, neat, and good-looking. It is the ideal object to meet the high standards of the construction work. By adopting proper specification, this product also can be used for encapsulation of control, communication, low voltage cable. Thus replaces the wrapping of plastic for sealing.
|
Properties |
Typical data |
Test method |
|
Tensile strength(MPa) |
≥10.4MPa |
ASTM D 2671 |
|
Elongation(%) |
≥300% |
ASTM D 2671 |
|
Tensile strength after heat ageing |
≥7.3MPa |
158°C×168h |
|
Elongation at break after heat ageing |
≥100% |
158°C×168h |
|
Longitudinal change(%) |
-8%~+8% |
ASTM D 2671 |
|
Flammability |
Self extinguish in 30 sec. |
AMS-DTL-23053/5 |
|
Dielectric strength |
≥15kv/mm |
IEC 60243 |
|
Volume resistivity |
≥1014Ω.cm |
IEC 60093 |
|
Product Code |
ID Before Shrink(mm) |
ID After Shrink(mm) |
Standard Length(m/roll) |
|
S5-PTFE-Φ0.5 |
0.7±0.2 |
≤0.40 |
200 |
|
S5-PTFE-Φ1.0 |
1.0±0.2 |
≤0.50 |
200 |
|
S5-PTFE-Φ1.5 |
1.5±0.2 |
≤0.90 |
200 |
|
S5-PTFE-Φ2.0 |
2.0±0.2 |
≤1.30 |
200 |
|
S5-PTFE-Φ2.5 |
2.5±0.2 |
≤1.50 |
200 |
|
S5-PTFE-Φ3.0 |
3.0±0.2 |
≤1.80 |
200 |
|
S5-PTFE-Φ3.5 |
3.5±0.2 |
≤2.0 |
200 |
|
S5-PTFE-Φ3.8 |
3.8±0.2 |
≤2.0 |
200 |
|
S5-PTFE-Φ4.0 |
4.0±0.3 |
≤2.5 |
200 |
|
S5-PTFE-Φ4.5 |
4.5±0.3 |
≤2.8 |
100 |
|
S5-PTFE-Φ5.0 |
5.0±0.3 |
≤3.0 |
100 |
|
S5-PTFE-Φ6.0 |
6.0±0.3 |
≤3.8 |
100 |
|
S5-PTFE-Φ7.0 |
7.0±0.3 |
≤4.0 |
100 |
|
S5-PTFE-Φ8.0 |
8.0±0.3 |
≤4.8 |
50 |
|
S5-PTFE-Φ9.0 |
9.0±0.3 |
≤5.0 |
50 |
Product detail pictures:
Related Product Guide:
We now have a specialist, efficiency workforce to deliver excellent service for our purchaser. We always follow the tenet of customer-oriented, details-focused for OEM Manufacturer Bunnings Electrical Cable - cold shrinkage cable accessories – Histe , The product will supply to all over the world, such as: Moscow, Kenya, Nepal, They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to for you of fantastic good quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We are confident that we have been going to have a bright prospect and to be distributed all over the world in the years to come.
(1) Quality Assurances
We have a strictly quality control process from the raw material to finished products. Advanced testing lab to make sure products quality and improve our creative ability. Quality and Safety is the soul of our products.
(2) Excellent Services
Many years of manufacturing experience and rich export business help us to establish a well-trained sales service team for all customers.
(3) Fast Deliveries
Strong manufacture capacity to satisfy urgent leading time. It is around 15-25 working days after we receive the payment. It varies according to the different products and quantity.
(4) OEM ODM and MOQ
Strong R&D team for quick new products’ development, we welcome OEM, ODM and customize request order. Whether selecting a current product from our catalog or seeking engineering assistance for your application. You can tell us about your sourcing requirements.
Normally our MOQ is 100pcs per models. We also produce OEM and ODM as you requirement. We are developing worldwide agent.
By Hellyngton Sato from Argentina - 2018.10.09 19:07
Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
By Jo from Turkey - 2017.11.01 17:04
Products categories
-
Hot Selling for 11kv Surge Arrester - Earthing...
-
100% Original Factory 2 Way Isolator Switch - ...
-
OEM/ODM Supplier Power Distribution Board Panel...
-
High definition Shrink Wrap Tubes - Heat Shrin...
-
Fixed Competitive Price Fused Isolator Switch F...
-
Hot New Products Surge Arrester Dc - Earthing ...
